Key highlights

The NANOlink(-S)-base is a highly miniaturized full-duplex TM/TC satellite communication subsystem, equipped with an efficient integrated amplifier, and an optional built-in encryption system that provides a high level of security between the satellite and the ground station (GS).

Several intelligent built-in functions enable the NANOlink(-S)-base to operate as a fully autonomous system, facilitating the streamlined acquisition of satellite diagnostic data. The optional security features (-S) utilize the CCSDS Space Data Link Security protocol.

Additionally, the NANOlink(-S)-base supports the symmetric AES-GCM-256 authenticated encryption algorithm and accommodates multiple encryption keys, making it a key subsystem in NANOsky avionics.

SkyLabs end-to-end communication solution combines satellite command, monitor and management and payload data reception with SkyEGSE-comm SDR modem based on comprehensive NANOsky CMM software development kit.

The system supports CCSDS and is compliant with all major ground station network service providers any other third party EGSE equipment.

Key features

  • Best SWaP-optimized product in its class
  • CCSDS compliant S-band full duplex transceiver
  • Software Defined Radio architecture
  • Advanced FDIR supervision functionality of SDR functionality
  • RF output power: Up to 30 dBm
  • Frequency band:  
    • Tx 2.200 - 2.300 GHz
    • Rx 2.025 - 2.110 GHz
  • Input sensitivity  -95 dBm @ 4 Mbps OQPSK
    Data rates: Up to 4 Mbps @ 2.5 MHz (OQPSK) Adjustable data rate in flight
  • Interface: Redundant CAN-TS and LVDS-TS
  • Power consumption: 6 W (Rx + Tx @ 1W RF output power) 1.5 W (Rx only)
  • Security (optional)
    • Encryption: AES-GCM-256
    • CCSDS 355.0-B-2: SDLP
    • CCSDS 355.1-B-1: SDLP-EP
  • Comprehensive housekeeping telemetry (voltages, currents, temperatures,...)
  • Redundant CAN for TM/TC

Flight heritage

Flight proven on several missions.

Disclaimer: satsearch is not responsible for any mistakes on this page, although we do our best to ensure correctness. Please report any mistakes to us.

Last updated: 2026-05-14

NANOlink(-S)-base – S-Band TM/TC CCSDS Communication Subsystem

9TRL

Downloads

Technical specs

mass
126 g
length
95 mm
width
91 mm
height
12 mm
power consumption
6 W (Rx + Tx @ 1 W output power)
1.5 W (Rx only)
output power
Adjustable up to 30 dBm (1W)
frequency
Tx: 2.200 to 2.300 GHz
Rx: 2.025 to 2.110 GHz
modulation
OQPSK
data rate
Up to 4 Mbps @ 2.5 MHz (OQPSK)
sensitivity
-95 dBm @ 4 Mbps OQPSK
supply voltage
5 V DC
data interface
redundant CAN
LVDS
processor type
PicoSkyFT
operating system
RTOS OS with NANOsky CMM
operating temperature
-10 to 50 C

Export

  • Click here to add the SkyLabs d.o.o. - NANOlink(-S)-base – S-Band TM/TC CCSDS Communication Subsystem to the Valispace engineering tool from satsearch
  • Click here to add the SkyLabs d.o.o. - NANOlink(-S)-base – S-Band TM/TC CCSDS Communication Subsystem to Lynapse Studio by Spacebackend
  • Click here to add the SkyLabs d.o.o. - NANOlink(-S)-base – S-Band TM/TC CCSDS Communication Subsystem to 360 by IENAI

from our blog

Go to blog

Ground station service providers: an overview of telemetry and telecommand communication services and networks for small satellites

Optical communications for small satellites and CubeSats - product roundup

Find a launch option for your CubeSat or small satellite - an overview of launch service providers