Key highlights

The NANOlink(-S)-boost-dp is a highly miniaturized full-duplex TM/TC satellite communication subsystem, equipped with an additional efficient integrated amplifier, a sophisticated two antenna port splitter/combiner, and an optional built-in encryption system that provides a high level of security between the satellite and the ground station (GS).

Several intelligent built-in functions enable the NANOlink(-S)-boost-dp to operate as a fully autonomous system, facilitating the streamlined acquisition of satellite diagnostic data. The optional security features (-S) utilize the CCSDS Space Data Link Security protocol.

Additionally, the NANOlink(-S)-boost-dp supports the symmetric AES-GCM-256 authenticated encryption algorithm and accommodates multiple encryption keys, making it a key subsystem in NANOsky avionics.

SkyLabs end-to-end communication solution combines satellite command, monitor and management and payload data reception with SkyEGSE-comm SDR modem based on comprehensive NANOsky CMM software development kit.

 

Key features

  • Best SWaP-optimized product in its class
  • CCSDS compliant S-band full duplex transceiver
  • Software Defined Radio architecture
  • Advanced FDIR supervision functionality of SDR functionality
  • RF output power: Up to 31.5 dBm (1.4 W) per antenna port
  • Frequency band:  
    • Tx 2.200 - 2.300 GHz
    • Rx 2.025 - 2.110 GHz
  • Input sensitivity  -86 dBm @ 4 Mbps OQPSK
  • Data rates: Up to 4 Mbps @ 2.5 MHz (OQPSK) Adjustable data rate in flight
  • Interface: Redundant CAN-TS and LVDS-TS
  • Power consumption: 17 W (Rx + Tx @ 1.4 W per each antenna)
  • Security (optional)
    • Encryption: AES-GCM-256
    • CCSDS 355.0-B-2: SDLP
    • CCSDS 355.1-B-1: SDLP-EP
  • Comprehensive housekeeping telemetry (voltages, currents, temperatures,...)
  • Redundant CAN for TM/TC
  • Additional PA to boost RF output power
  • Integrated diplexer interfaces to the splitter/combiner on two antenna ports
  • Integrated additional RX filter coupled with an LNA

Flight heritage

Flight proven on several missions.

Disclaimer: satsearch is not responsible for any mistakes on this page, although we do our best to ensure correctness. Please report any mistakes to us.

Last updated: 2026-05-14

NANOlink(-S)-boost-dp – S-Band TM/TC CCSDS Communication Subsystem

9TRL

Downloads

Technical specs

mass
407 g
length
95 mm
width
91 mm
height
32 mm
power consumption
17 W (Rx + Tx @ 1.4 W output power at antenna port)
1.9 W (Rx only)
output power
Adjustable up to 31.5 dBm (1.4W) per antenna port
frequency
Tx: 2.200 to 2.300 GHz
Rx: 2.025 to 2.110 GHz
modulation
OQPSK
data rate1
Up to 4 Mbps @ 2.5 MHz (OQPSK)
input sensitivity
-86 dBm @ 4 Mbps OQPSK
supply voltage
5 V DC (+/- 10%)
data interface
redundant CAN
LVDS
processor type
PicoSkyFT
operating system
RTOS OS with NANOsky CMM
operating temperature
-10 to 50 C

1. Adjustable, also in flight.

Export

  • Click here to add the SkyLabs d.o.o. - NANOlink(-S)-boost-dp – S-Band TM/TC CCSDS Communication Subsystem to the Valispace engineering tool from satsearch
  • Click here to add the SkyLabs d.o.o. - NANOlink(-S)-boost-dp – S-Band TM/TC CCSDS Communication Subsystem to Lynapse Studio by Spacebackend
  • Click here to add the SkyLabs d.o.o. - NANOlink(-S)-boost-dp – S-Band TM/TC CCSDS Communication Subsystem to 360 by IENAI

from our blog

Go to blog

Ground station service providers: an overview of telemetry and telecommand communication services and networks for small satellites

Optical communications for small satellites and CubeSats - product roundup

Find a launch option for your CubeSat or small satellite - an overview of launch service providers