Satellites and subsystems > Command and Data Handling (C&DH) systems > On-Board Computers (OBCs) > NINANO - On Board Computer for Nanosatellites
Key highlights
The STEEL Electronique NINANO is a high performance, flexible, central processing board designed for nanosatellites.
Key features of the NINANO OBC include:
- Zynq 7030 SoC
- 1Gbyte DDR3 or 512Mbyte EDAC protected
- 8Kbyte FRAM
- 16Mbyte QSPI Flash for bootloaderand PL configuration
- 8Gbits NAND flash for data storage(PS) or 128Gbits if handledby PL 33.33 MHz Ultrastable XO
- 3-axis magnetometer(option)
The NINAO OBC includes the following data interfaces:
- I2C Master or Slave, 2 UART, CAN bus, JTAG for debug ARM TRACE, 1 wire bus, 2 SpaceWire or 4 in / 4 out (LVDS or RS422), MTQ commands
- XBT interface: LVDS (data + clock) 200Mbps
- S-band transponder interface: RS422 (RX/TX data + clock) 10 Mbps
- 8 HCMOS GPIO and 12 LVCMOS user GPIO
Disclaimer: satsearch is not responsible for any mistakes on this page, although we do our best to ensure correctness. Please report any mistakes to us.
Last updated: 2024-12-16
NINANO - On Board Computer for Nanosatellites
Technical specs
mass
102 g
length
90 mm
width
95 mm
height
15 mm
total power @50 deg C
low speed/light load: 3W
full speed/high load: 7.8W
full speed/high load: 7.8W
processor type
Zynq 7030 SoC
data storage
1Gbyte DDR3 or 512Mbyte EDAC protected
8Kbyte FRAM
16Mbyte QSPI Flash for bootloaderand PL configuration
8Gbits NAND flash for data storage(PS) or 128Gbits if handled by PL
8Kbyte FRAM
16Mbyte QSPI Flash for bootloaderand PL configuration
8Gbits NAND flash for data storage(PS) or 128Gbits if handled by PL
data interface
I2C Master or Slave
2 UART
CAN bus
2 SpaceWire
2 UART
CAN bus
2 SpaceWire
temperature (IF)
-30 to 55 C
Export
